1,200 Pcs Hydraulic Pile Breaker Solution for a High-Rise Residential Tower Project in Southeast Asia
Project Location: Kuala Lumpur, Malaysia
Product Supplied: Modular Hydraulic Pile Breaker for Round Bored Piles (Model: APB-1300, 11 Modules)
Client Type: Piling & Foundation Contractor
Application: Pile head trimming for cast-in-place bored piles
A leading foundation contractor in Southeast Asia was awarded a high-rise residential tower project requiring more than 1,200 cast-in-place bored piles with diameters ranging from 800 mm to 1,200 mm. The pile heads, cast 0.5–1.0 m above the design cut-off level, had to be trimmed down to expose clean rebar for the pile cap connection.
The contractor initially relied on manual jackhammer crews and excavator-mounted hydraulic hammers. After the first two months, the project fell behind schedule — each pile took 40–60 minutes to break manually, rebar was frequently damaged, and micro-cracks propagated into the permanent pile body, triggering costly re-inspection and rework.
2. Customer RequirementsAfter comparing several suppliers, the client approached APIE FOUNDATION EQUIPMENT (CHINA) LIMITED with four non-negotiable requirements:
- A modular hydraulic pile breaker that could be reconfigured on site for different pile diameters (600 mm–1,300 mm) using a single mainframe
- Compatible with their existing 20–30 ton excavators, without requiring a dedicated power pack for this pile range
- Capable of preserving rebar integrity — zero rebar damage tolerance specified by the main contractor
- Delivery and on-site commissioning within 4 weeks to align with the revised piling program
Our technical team reviewed the pile schedule, concrete grade (C35, with 8×20 mm longitudinal rebars) and the client’s excavator fleet, then proposed the APB-1300 excavator-mounted hydraulic pile breaker, configured as follows:
| Item | Specification |
|---|---|
| Model | APB-1300 Modular Hydraulic Pile Breaker |
| Applicable Pile Diameter | 1,150 – 1,300 mm (adjustable by adding/removing modules) |
| Number of Modules | 11 |
| Working Pressure | 35 MPa |
| Cylinder Stroke | 250 mm |
| Breaking Force per Module | 70 T |
| Machine Weight | 3,300 kg |
| Compatible Carrier | 20 – 30 T excavator |
| Cutting Teeth | High-strength alloy steel, rebar-friendly blunt chisel design |
Working principle: hydraulic cylinders apply synchronized radial pressure from 360°, fracturing the concrete pile head cleanly along a horizontal plane while leaving the internal reinforcement untouched — eliminating the micro-cracking problem common with impact hammers.
We also supplied APB-800 and APB-1000 module sets so a single excavator could service the full 600 mm–1,300 mm pile range on site, with module changes completed by two workers in under 20 minutes.
4. On-Site Results| KPI | Before (Manual + Hammer) | After (APIE Hydraulic Pile Breaker) |
|---|---|---|
| Average time per pile head | 40–60 min | 5–8 min |
| Daily output per rig | 8–10 piles | 60+ piles |
| Rebar damage rate | ~15% | 0% |
| Noise level | High (impact hammer) | Low, suitable for urban night work |
| Micro-cracks in pile body | Frequent | None reported |
Across the full 1,200-pile scope, the contractor reported overall pile-trimming productivity improvement of over 600%, finishing the pile head breaking works 6 weeks ahead of the revised schedule.
5. Client Feedback6. Equipment Supplied in This Case*“The APIE hydraulic pile breaker completely changed how we handle pile head breaking. One excavator with the APB series replaced three jackhammer crews, and the rebar is always clean. We have already ordered a second set for our next project.”*
— Project Manager, Piling Contractor, Malaysia
- 3 × APB-1300 modular hydraulic pile breakers (mainframes + 11 modules each)
- 2 × APB-800 module sets for 600–800 mm piles
- Spare cutting teeth, seal kits and hydraulic hoses for 12 months of operation
Tell us your pile diameter, concrete grade and excavator model — our engineers will recommend the most cost-effective modular pile breaker configuration within 24 hours.
- 📧 Email: apie@apiepiling.com
- 📱 WhatsApp: +86 189 2128 7030
- 🌐 Website: http://www.apiefoundation.com